B-Air Kodiak 1.5 HP ETL Bounce House Blower for Large Bounce Houses and Inflatables Slides

#ad
B-Air BA-KP-1.5ETL #ad - Max air volume - 1080 CFM Designed to produce 9. 8 inches of static pressure while maintaining a low 8. 8 running amp draw. Safety designed "reverse air louvers" for B-AIR blowers standards; Cycle: 60 Hz. True to its name, the new Kodiak 1. 5 hp is b-air’s latest most powerful innovation in a 1. 5 hp blower. Durable long-lasting Roto molded housing that is ETL certified and listed reliable inflatable air mover.

Most versatile unit in the kodiak family with ample pressure needed to inflate larger inflatable bounce houses to all size inflatable slides. Voltage: 115V. As with its predecessor the KP-1. 5 is housed in a compact light weight high impact roto molded housing with the same easy to carry handle, 25 ft cord and the patented safety designed 'reverse air louvers' all B-Air Blowers have standard.

B-Air Kodiak 1.5 HP ETL Bounce House Blower for Large Bounce Houses and Inflatables Slides #ad - The kp-1. 5 is housed in a compact light weight high impact Roto molded housing with the same Easy to carry handle. Based on the proven kodiak 1 HP the NEW KP-1. 5 is designed to produce 1290 CFM with 9. 8 inches of static pressure while maintaining a low 8. 8 running amp draw.

#ad



Cloud 9 Commercial Grade Bounce House 100% PVC Castle Jump Inflatable Only

#ad
Inflatable HQ #ad - Never use in windy or other inclement weather. Tall, base is 13 ft. The wide, elevated front slide is a safe way to exit this bouncer rather than accidentally bouncing and falling out of the house and onto the ground. Additional belting reinforcement is used at key stress points, and heavy-duty, multilayer stitching is used throughout.

A 1200 watt blower is required for use and not included. Grade: premium, suitable for rental / commercial use. This bouncer's roof shields children from the sun and features a safety escape hatch to exit in the event deflation occurs during a power failure. Always use gcfi-protected receptacles/circuits and take caution to keep blower and power cords in dry locations.

Cloud 9 Commercial Grade Bounce House 100% PVC Castle Jump Inflatable Only #ad - Made of 100% commercial grade PVC. Zippered flaps allow the bouncer to quickly be deflated and taken down for storage. Make sure bounce house is secured to the ground prior to use. All materials comply with the Lead Free Toys Act. Dimensions: Approximately 14 ft. Complies with the Lead Free Toys Act. All high-stress areas including the bouncing surface, mattress sides, bottom, and slide are made from industrial strength, 18-ounce 0.

#ad



2 HP - CFM Pro Commercial Inflatable Bounce House Blower

#ad
CFM PRO #ad - Features air intake/outlet screens and a convenient top handle. Fun colorful castle design. Strong and efficient 2 HP motor. 6" x 6-1/4" outside diameter air outlet chute. Durable composite housing with mounted handle plus integrated protective screens to cover air intake and outlet. Great for use with commercial outdoor bounce houses, obstacle courses, water slides, jumpers, and other inflatables.

Made of 100% commercial grade PVC. Complies with the Lead Free Toys Act. For use with commercial bounce houses, water slides, obstacles courses, jumpers, and other inflatables. Durable and rugged composite housing. Recessed power switch protected by a water-proof rubber coating with a grounded, 3-prong plug, and an extra long 14-1/2' power cord USA Standard, 120 volts / always use a GFCI protected outlet.

2 HP - CFM Pro Commercial Inflatable Bounce House Blower #ad - This product has been tested for safety and is ETL Listed. Strong and efficient 2 horsepower motor produces more CFM per watt than comparable blowers. Suitable for commercial or residential use. Approximately 13 x 13 x 14 feet total inflated size. A 1200 watt blower is required for use and not included.

#ad



Tear-Aid Vinyl Repair Patch Kit Type B

#ad
A.C. Kerman - LE TA-D-ROLL-B #ad - This flexibility allows the patch to conform to irregular surfaces without restricting the movement of the repaired material. The tear-aid type b vinyl repair patch sticks to - Vinyl and Vinyl-coated material ONLY. Fun colorful castle design. Of the highest quality and standards. Strong and efficient 2 HP motor.

Vinyl has oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond. For use with commercial bounce houses, obstacles courses, water slides, jumpers, and other inflatables. Durable and rugged composite housing. The patch also conforms to irregular surfaces and won't turn gummy in high heat.

Each tear-aid repair patch is made from an exceptionally tough, elastomer that resists puncture and tearing. The tear-aid type b vinyl repair patch sticks to - vinyl and vinyl-coated material ONLY. Tear-aid vinyl repair patches contain an inhibitor that blocks the oils found in vinyl resulting in a long lasting repair.

Tear-Aid Vinyl Repair Patch Kit Type B #ad - Tear-aid repair patches provide a simple and easy method of patching holes and tears, as well as an excellent protective film solution. Won't turn gummy in high heat. Vinyl has oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond. Complies with the Lead Free Toys Act.

#ad



HH-66 PVC Vinyl Cement Glue with Brush 8oz 1

#ad
RH Products #ad - The best pVC cement for inflatable industry. Made in usa". Highly resistant to Temperature and Weather Extremes. This item cannot be shipped to california note: Not for use on fabrics, carpet, headliners, etc. The hh-66 vinyl cement drys very fast. Made of 100% commercial grade PVC. We highly recommend customers use HH-66 vinyl cement to repair your inflatables.

Suitable for commercial or residential use. We had tested so many vinyl cement brands from overseas and the quality just can not match the HH-66. Resists UV discoloring. Made in USA. These items can ONLY shipped by UPS Ground. It provides instant adhesion with no sewing, NO GLUE and no mess. Features air intake/outlet screens and a convenient top handle.

HH-66 PVC Vinyl Cement Glue with Brush 8oz 1 #ad - Sold in 8 oz. The best quality and Performance "GUARANTEE". Excellent for Patching and Sealing. Won't turn gummy in high heat. These items can only be shipped within the USA.

#ad



Steel Hook Stakes for Tents, Tarps, Gardens, and Commercial Inflatable Bouncers 18-Inch Length, 5/8-Inch Diameter, 25-Pack

#ad
TentandTable #ad - Durable and flexible product. Made of 100% commercial grade PVC. Strong and efficient 2 HP motor. Made in USA. Specs:metal type - steelhead type - 2" hookrequired for securing tents to the ground properly Approximately 13 x 13 x 14 feet total inflated size. Stops tears from running. Each box of tear-aid patch contains - 1 3 in x 5 ft roll of tear-aid patch that cuts easily with scissors to any size, 1 Set of Illustrated Instructions, 2 Alcohol Prep Pads, Box Dimensions: 3.

75 " x 3. 75" x 3. 75". Tear-aid repair patches are made in the u. S. A. Complies with the Lead Free Toys Act. Features air intake/outlet screens and a convenient top handle. Features - can be driven in flush with the ground to avoid tripping hazards. Tear-aid vinyl repair patches contain an inhibitor that blocks the oils found in vinyl resulting in a long lasting repair.

Steel Hook Stakes for Tents, Tarps, Gardens, and Commercial Inflatable Bouncers 18-Inch Length, 5/8-Inch Diameter, 25-Pack #ad - Fun colorful castle design. Hook stakes can be driven in flush with the ground to avoid tripping hazards to provide a safer environment around your inflatable unit.

#ad



Inflatable HQ Commercial Grade Bounce House 100% PVC Jungle Jumper Inflatable Only

#ad
Inflatable HQ #ad - Measures approximately 17' x 13' at its base including slide exit and is 12' tall. The best pVC cement for inflatable industry. Never use in windy or other inclement weather. Approximately 17 x 13 x 12 feet total inflated size. A 1200 watt blower is required for use and not included. Made in USA. Vinyl has oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond.

Make sure bounce house is secured to the ground prior to use. This puncture-proof pvc material is much stronger approximately 5X stronger than nylon used in lesser-quality units as it won't tear, fade, or get moldy, wear out with use, and it is far easier to clean. Stops tears from running. Tear-aid repair patches provide a simple and easy method of patching holes and tears, abrasion resistant, matte finish, as well as an excellent protective film solution.

Inflatable HQ Commercial Grade Bounce House 100% PVC Jungle Jumper Inflatable Only #ad - Each box of tear-aid patch contains - 1 3 in x 5 ft roll of tear-aid patch that cuts easily with scissors to any size, 2 Alcohol Prep Pads, 1 Set of Illustrated Instructions, Box Dimensions: 3.75 " x 3. 75" x 3. 75". Tear-aid repair patches are made in the u.

#ad



B-AIR Koala 1 HP Bounce House Blower for Large Sized Inflatable Bounce House and Consumer Slides

#ad
Intertex, Inc. KP-1200 #ad - Complies with the Lead Free Toys Act. See-thru patch for repairing holes and tears in vinyl. Approximately 17 x 13 x 12 feet total inflated size. Don't let the size of the b-air koalas fool you! the koala 1/2 HP blower, for example is ideal for inflating the smaller play structures like a 13 x 13 Bounce house or smaller home use inflatables.

Amp; nbsp; the koala is very efficient and economical with its smaller motor and is extremely easy to transport because of their light weight and built-in handles. For use with commercial bounce houses, jumpers, water slides, obstacles courses, and other inflatables. Durable and rugged composite housing.

B-AIR Koala 1 HP Bounce House Blower for Large Sized Inflatable Bounce House and Consumer Slides #ad - Don't throw it away repair it. Bonds for vinyl Coated and Vinyl Laminated Fabrics. A 1200 watt blower is required for use and not included. Strong and efficient 2 HP motor. The tear-aid patch is see-thru to work on any color and is uv resistant to prevent yellowing for years. Suitable for commercial or residential use.

Keep tear-aid handy and be prepared to be a hero. Heavy duty - Made from high quality, durable steel. Of the highest quality and standards.

#ad



2.0 HP Blower for Inflatables - Bounce House Blower

#ad
Gorilla Bounce #ad - Made of 100% commercial grade PVC. Heavy duty - Made from high quality, durable steel. Keep tear-aid handy and be prepared to be a hero. A 1200 watt blower is required for use and not included. Size - 18-inch length, 5/8-inch Diameter. Won't turn gummy in high heat. The best pVC cement for inflatable industry. Of the highest quality and standards.

Efficient and economical. Made in USA. Excellent for Patching and Sealing. Each tear-aid repair patch is made from an exceptionally tough, elastomer that resists puncture and tearing. The tear-aid type b vinyl repair patch sticks to - vinyl and vinyl-coated material ONLY. The patch also conforms to irregular surfaces and won't turn gummy in high heat.

2.0 HP Blower for Inflatables - Bounce House Blower #ad - Ideal for inflating larger sized consumer inflatable bounce houses ranging from 15' x 15' s to consumer slides and/or inflatable display structures. Ce/ul 1500w. Approximately 13 x 13 x 14 feet total inflated size. It provides instant adhesion with no sewing, NO GLUE and no mess. Features - can be driven in flush with the ground to avoid tripping hazards.

#ad



Zoom Blowers 2.0 HP XLT

#ad
Available Upon Request #ad - It's electrical components, motor, air vent and blower has been recently reconfigured by the company to consume up to 15 percent less power while providing 20 percent more air pressure. Durable and flexible product. Heavy duty - Made from high quality, durable steel. Ideal for inflating larger sized consumer inflatable bounce houses ranging from 15' x 15' s to consumer slides and/or inflatable display structures.

Ce/ul 1500w. Fun colorful castle design. Tear-aid vinyl repair patches contain an inhibitor that blocks the oils found in vinyl resulting in a long lasting repair. The chute is 2 inches longer than previous XLT models. Size - 18-inch length, 5/8-inch Diameter. Each box of tear-aid patch contains - 1 3 in x 5 ft roll of tear-aid patch that cuts easily with scissors to any size, 2 Alcohol Prep Pads, 1 Set of Illustrated Instructions, Box Dimensions: 3.

Zoom Blowers 2.0 HP XLT #ad - 75 " x 3. 75" x 3. 75". Tear-aid repair patches are made in the u. S. A.

#ad



HH-66 PVC Vinyl Cement with Brush 32 Ounce

#ad
RH Products 13 #ad - See-thru patch for repairing holes and tears in vinyl. Resists UV discoloring. They cannot be shipped by next day, 2nd Day, 3 Day or US MAIL services. Vinyl has oils that are absorbed by most adhesives which causes the adhesive to turn gooey, gummy, and ultimately lose bond. This item cannot be shipped to california note: Not for use on fabrics, carpet, headliners, etc.

. Of the highest quality and standards. Features air intake/outlet screens and a convenient top handle. Don't throw it away repair it. Bonds for vinyl Coated and Vinyl Laminated Fabrics. Highly resistant to Temperature and Weather Extremes. The best pVC cement for inflatable industry. These items cannot be shipped Internationally.

HH-66 PVC Vinyl Cement with Brush 32 Ounce #ad - The best quality and Performance "GUARANTEE". Made in usa". Excellent for Patching and Sealing. The best pVC cement for inflatable industry. Excellent for Patching and Sealing.

#ad