OESS Lab Clamp 3 Prong Finger Style Laboratory 360°Swivel Type Rubber-Coated Head

#ad
OESS #ad - Covered jaws for protection and grip. Maximum width of Jaw opening is 90mm. 3 prong finger style rubber-coated head 360°Swivel lab clamp Sold as 1 pcs 360 degrees swivels 3 finger lab clamp. Strong die-cast construction. 3 finger clamp accepts rods up to 20 mm.

#ad



American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8" Length x 5" Width Base Size

#ad
American Educational 7-G15-A #ad - Available in cast iron. Type is coated with an acid resistant finish. Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length. Strong and dependable support. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Strong and dependable support. The rods are nickel plated steel and are threaded to fit the base.

. Coated with an acid resistant finish. Made of cast iron. The rods are nickel plated steel and are threaded to fit the base.

#ad



United Scientific SSB6X9 Support Stand with Rod, 9" Base Length x 6" Base Width

#ad
United Scientific Supplies SSB6X9 #ad - The rods are nickel plated steel and are threaded to fit the base. Bases and Rods are also available individually. United Scientific Supplies. Strong and dependable support. Made of cast iron. Stamped steel bases, with black enamel finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Coated with an acid resistant finish.

Removable, zinc plated steel rods.

#ad



EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs Opens to 90mm in Dia. with Boss Head

#ad
EISCO CH0688 #ad - Strong and dependable support. Extends out approximately 5" from rod, not adjustable. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. The rods are nickel plated steel and are threaded to fit the base. Jaws have a capacity of 90 mm. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Attaches to rods up to 15 mm in diameter. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Can mount vertical or horizontal -- rotates on clamp. United Scientific Supplies. Made of cast iron. Coated with an acid resistant finish.

#ad



OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip

#ad
OESS #ad - Maximum width of Jaw opening is 90mm. Coated with an acid resistant finish. Can mount vertical or horizontal -- rotates on clamp. The rods are nickel plated steel and are threaded to fit the base. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

3 finger clamp accepts rods up to 20 mm. Strong die-cast construction. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Made of cast iron. 3 prong finger style rubber-Coated Head lab clampBlack lab retort stand bosshead clamp holder Strong and dependable support. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head A Black Laboratory Stand Clip #ad - Covered jaws for protection and grip. United Scientific Supplies. Extends out approximately 5" from rod, not adjustable. Attaches to rods up to 15 mm in diameter.

#ad



OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip

#ad
OESS FCBC #ad - Strong die-cast construction. Strong die-cast construction. Maximum width of Jaw opening is 5cm. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. United Scientific Supplies. Package include:1 pcs 2 finger adjustment lab clamp rubber-wrapped head and 1 pcs black lab stand clipPerfect for laboratory use Strong and dependable support.

Rubber-wrapped jaws will safely protect your glassware from scratching bad. Can mount vertical or horizontal -- rotates on clamp. 3 finger clamp accepts rods up to 20 mm. Maximum width of Jaw opening is 90mm. Coated with an acid resistant finish. Attaches to rods up to 15 mm in diameter. Made of cast iron. Rod length*width:6.

OESS 2 Finger Adjustment Lab Clamp Retort Prong Jaw Style Rubber-Wrapped Head A Black Laboratory Stand Clip #ad - 3" *03". Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Extends out approximately 5" from rod, not adjustable. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

#ad



Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set

#ad
EISCO #ad - Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Rod length*width:6. 3" *03". Strong and dependable support. Everything is in one box. Maximum width of Jaw opening is 5cm.

Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. Attaches to rods up to 15 mm in diameter. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. The rods are nickel plated steel and are threaded to fit the base. 3 finger clamp accepts rods up to 20 mm.

Support Stand 8" x 5", 12mm Dia. Rod 24" L, Cork Lined Burette Clamp with Boss Head and Retort Ring 2.5" Dia - Laboratory Grade Metalware Set #ad - Laboratory grade metalware Set - Support Stand 8" x 5. 25", stainless steel Rod 23" L, 045" dia. 10x1. 5 thread, Bosshead clamp 4.

#ad



American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size

#ad
American Educational 7-G14 #ad - United Scientific Supplies. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Can mount vertical or horizontal -- rotates on clamp. Blue powder coated support stand base 8" x 5. 25". Rubber-wrapped jaws will safely protect your glassware from scratching bad. Covered jaws for protection and grip. Maximum width of Jaw opening is 5cm.

Strong die-cast construction. Strong and dependable support. Strong and dependable support. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. 3 finger clamp accepts rods up to 20 mm. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip.

American Educational Cast Iron Support Ring Stand with Acid Resistant Finish, 6" Length x 4" Width Base Size #ad - Type is coated with an acid resistant finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. The rods are nickel plated steel and are threaded to fit the base. Coated with an acid resistant finish. Maximum width of Jaw opening is 90mm. The rods are nickel plated steel and are threaded to fit the base.

#ad



Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C

#ad
Thomas Scientific 4430 #ad - Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. The thomas traceable kangaroo thermometer is a dual-range digital thermometer used for measuring temperature in test-tubes, beakers, and other laboratory equipment.

7. 5" stainless-steel probe is resistant to most chemicals. Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment. The thermometer is traceable to national Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization ISO 17025 levels.

Thomas Traceable Kangaroo Thermometer, 7.5" Probe Length, -58 to 572 degree F, -50 to 300 degree C #ad - Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. Coated with an acid resistant finish. Calibrated to iso 17025 traceability standards for reliability of measurements. The lcd display has 075"-high digits for increased visibility.

It is attached to the base by a 42" cable. Strong and dependable support. Perfect setup for a lab.

#ad



7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color

#ad
Hotodeal #ad - Maximum width of Jaw opening is 5cm. Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment. Length diameter: 10mm 5mm 12mm 7mm 20mm 8mm 25mm 7mm 28mm 8mm 30mm 8mm 35mm 9mm Strong and dependable support. Covered jaws for protection and grip. Extends out approximately 5" from rod, not adjustable.

Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Base: 6" length by 4" width; rod: 5/16" diameter by 18" length. Made of cast iron. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. The rods are nickel plated steel and are threaded to fit the base. Coated with an acid resistant finish. Perfect setup for a lab.

7pcs PTFE Magnetic Stirrer Mixer Stir Bar Spinbar Stirring White Color #ad - Coated with an acid resistant finish. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Heavy duty 2 finger style rubber-wrapped head lab clamp with black laboratory stand clip, excellent for laboratory use. The rods are nickel plated steel and are threaded to fit the base. Rubber-wrapped jaws will safely protect your glassware from scratching bad.

#ad



Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size

#ad
The Punjab Scientific Industries #ad - Attaches to rods up to 15 mm in diameter. Blue powder coated support stand base 8" x 5. 25". Dual-range digital thermometer for measuring temperature in test-tubes, beakers, and other laboratory equipment. Maximum width of Jaw opening is 90mm. Stainless steel rod 23" length, 045" dia. 10-1. 5 thread. Strong and dependable support.

Strong die-cast construction. Strong die-cast construction. The rods are nickel plated steel and are threaded to fit the base. Made of cast iron. 3 finger clamp accepts rods up to 20 mm. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length. Used to stir a liquid or solution in biological, chemical, medical and research laboratory applications.

Sciencent Retort Stand Premium Support Stand Rod 20" Acid Resistant, 8" Length x 5" Width Base Size #ad - High temperature up to 250 ℃, low temperature up to -196 ℃. With acid and alkali resistance, resistant to a variety of organic solvents, almost insoluble in solvents. Stir bars are coated with teflon PTFE covering, built-in pivot axle helps to reduce vibration and wear during stirring. These are brand new, never used, PTFE stirrer bars.

Set contains corrosion and Acid Resistant Base and Rod for lab experiments.

#ad