PIONEER Air Conditioner WYS018GMFI22RL Mini Split Heat Pump, 18000 BTU-208/230 V

#ad
Parker Davis HVAC International, Inc. WYS018GMFI22RL #ad - Voltage: 208~230 vac, 1 phase standard household 2 line power, 60 hertz, l1-l2-g. Please see the active links on this page for full specks, manuals, etc. Sound level:61 dBA. Cooling capacity: 18, 000 btu/h with 22. 5 seer efficiency. Night mode function automatically adopts the temperature settings to the naturally changing body temperature levels during the night.

For full technical specks and other information, please refer to the high seer web site. Pioneer brand ways series ductless split heat pump systems come in a range of capacities; from 9000 BTU/hour to 36000 BTU/hour. Heats down to -12°f ambient. Full system set, outdoor section, containing indoor section, remote controller and standard installation accessories.

PIONEER Air Conditioner WYS018GMFI22RL Mini Split Heat Pump, 18000 BTU-208/230 V #ad - Additionally, an automatic switchover mode is available for totally automatic operation through it's on board computer. With a pioneer ductless mini split type air conditioning system, quietly, it is possible to heat or cool any contiguous area, effectively and efficiently. Arctic heating version with base pan heaters.

Pioneer newest ways Series wall mount mini split ductless inverter air conditioning and heat pump system. A timer function allows the user to set the system to start or stop running at a certain time. Cloud programmable wireless inverter remote access function is also available.

#ad



Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE

#ad
Pioneer WYS-POAD-BRS #ad - Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. This new port size is 5/16" saE and some gauge sets carry 1/4" SAE connectors. Port adapter converts the 5/16" SAE ports to use with 1/4" SAE gauge sets. R22. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Used on most newer R410A Ductless Mini Split Systems.

New r410a ductless mini split systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system i. E.

#ad



Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

#ad
DuctlessAire FBA_CECOMINOD072410 #ad - Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Fits 9000-36000 Btu Units. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Used for supporting condensing units up to 350 pounds, this bracket features a crossbar that is attached to the wall, and two L-shaped support brackets that are hooked and bolted into place on the crossbar.

It includes hardware and expansion bolts for wall mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, vandalism, floods, debris, snow, etc. Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall.

Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser #ad - Slight rearward tilt to wall is recommended for safety purposes. Universal heavy duty outdoor wall bracket. See pictures for dimensions. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Please check to ensure clearance requirements are being met for your minisplit unit. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

#ad



SIEMENS WN2060U Non-Fused AC Disconnect

#ad
Siemens WN2060U #ad - Requires 1/2 inch 12 mm bit. 60 amp. Outdoor rated. Universal heavy duty outdoor wall bracket. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Pull out type. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

Siemens wn2060u non-fused ac disconnect converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Dimensions: Width: 33. 5" height: 18" depth: 22". Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

SIEMENS WN2060U Non-Fused AC Disconnect #ad - Used on most newer R410A Ductless Mini Split Systems. It includes hardware and expansion bolts for wall mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, debris, snow, floods, vandalism, etc.

Cross bar, each arm has two upgraded 8. 8 grade bolts with lock nuts, wall fixation kit, Two L-shaped brackets foldable, Anti-vibration feet ungraded to 1 1/4 inches tall. Slight rearward tilt to wall is recommended for safety purposes.

#ad



Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers

#ad
Pioneer BRK-FLD-2P #ad - Fits 9000-36000 Btu Units. Pull out type. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. Dimensions: Width: 33. 5" height: 18" depth: 22". Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

Requires 1/2 inch 12 mm bit. 60 amp. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Universal heavy duty outdoor wall bracket.

Pioneer Mounting Bracket for Mini Split Ductless Air Conditioner Condensing Unit. 2P for 9000 and 12000 BTU Condensers #ad - It includes hardware and expansion bolts for wall mounting. Used on most newer R410A Ductless Mini Split Systems. Non-fused. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, debris, snow, vandalism, floods, etc.

#ad



Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant

#ad
Refrigeration Technologies RT201B #ad - Refrigeration technologies nylogâ" gasket thread sealant and assembly lube #rt201b. Nylog-gasket/thread sealant. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs.

Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils. Refrigeration Technologies. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.

Refrigeration Technologies RT201B Nylog Gasket/Thread Sealant #ad - 4 rubber vibration absorbers also included. 4 sizes to choose from. It includes hardware and expansion bolts for wall mounting. Dimensions: Width: 33. 5" height: 18" depth: 22". Fits 9000-36000 Btu Units. Used on most newer R410A Ductless Mini Split Systems.

#ad



Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2"

#ad
Sealproof #ad - Dimensions: Width: 33. 5" height: 18" depth: 22". Nylog-gasket/thread sealant. Requires 1/2 inch 12 mm bit. 60 amp. Outdoor rated. Whip is assembled with all UL components. Used on most newer R410A Ductless Mini Split Systems. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load.

The sealproof power Whip Assembly is assembled with all UL components. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from. Pull out type. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

Sealproof Power Whip Assembly, 1/2-Inch x 6 Ft Nonmetallic Liquid Tight Flexible Electrical Conduit and 10 Gauge Wire Single Phase Preassembled A/C Hook-up Whip Kit, 1/2" #ad - Resists corrosion, oil and water; Outdoor, sunlight resistant. Lower installation cost and a time saving convenience. Applications: air condition unit hook up; heat pumps; pools; spas; outdoor lighting; motors and controls; solar panels. As an alternative to ground level pads, debris, floods, vandalism, snow, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, etc.

#ad



CLEAR STYLE Anti Vibration Pads, Rubber Pads Vibration Absorbing for AC Plastic and Rubber Mounting, Bracket for Outdoor Units Mini Split System Condensers

#ad
CLEAR STYLE AC0085 #ad - Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Dimensions: Width: 33. 5" height: 18" depth: 22". Universal heavy duty outdoor wall bracket. Order your anti vibration pads now!!! converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set. 100% satisfaction guarantee: if you don't love our ANTI VIBRATION pads - please return for a 100% refund.

Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Heavy duty steel Construction, Galvanized and Epoxy Painted. Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting. 4 rubber vibration absorbers also included. 4 sizes to choose from.

CLEAR STYLE Anti Vibration Pads, Rubber Pads Vibration Absorbing for AC Plastic and Rubber Mounting, Bracket for Outdoor Units Mini Split System Condensers #ad - Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Nylog-gasket/thread sealant. Anti vibration floor mount for mini split air conditioners set oF 4 PCS, each unit can hold up to 100 pound weight 400 pound per set very nice design can use on floors, very strong anf good mounting, roofs, balconies etc.

Best solution for the installation, all you have to do is to place the outdoor or indoor unit "legs" holes in the screws and fasten the nuts of the ANTI VIBRATION pads. Main use: anti vibration Pad, Condenser pads, Vibration Isolator pads.

#ad



Outdoor Wall Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

#ad
Jeacent Innovations PL412D-1 #ad - Designed for easy installation. Features: -exclusive built-in bubble level to correct mounting slope position -triangle stiffeners design enhance the structure for long term stability -raises the condensing unit above ground level for multi-floor mounting -solid epoxy-coated thick galvanized steel plate, matte surface to provide traction -Works with any brand name Wall Mounted Split Air Conditioner Heat Pump Systems Specifications:  - one-sided condenser mounting feet from 10 5/8" to 18 5/16" - 31 1/2" cross bar - 17 11/16" long vertical rail - 21 5/8" long resting support - The support holds up to 350 pounds - Support A/C BTU ratings of:  9, 000 BTU to 36, 000 BTU Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

Whip is assembled with all UL components. Jeacent mounting bracket for ductless mini split air conditioner Heat Pump Systems, 9000-36000 Btu Optimize the safety of your air conditioner condensing unit installation with the sturdy heavy-duty wall mounting bracket support. Universal heavy duty outdoor wall bracket.

Outdoor Wall Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser #ad - Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Requires 1/2 inch 12 mm bit. 60 amp. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting.

#ad



Rubber Vibration Isolator Mounting Bracket for Mini Split Air Conditioner Condenser

#ad
Jeacent Innovations 5824063029 #ad - Dimensions: Width: 33. 5" height: 18" depth: 22". Jeacent vibration absorbing rubber mounts for ductless Mini Split Air Conditioner Heat Pump Systems Optimize the safety of your air conditioner condensing unit installation with the sturdy heavy-duty rubber vibration isolation feet mount support. Accurate construction - advanced technics to ensure brackets are perpendicular to each other when condenser leveling.

Requires 1/2 inch 12 mm bit. 60 amp. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Breezy installation & Versatility - assemble easy enough, all necessary hardware included. Set of 4 pieces. Designed for easy installation. Features: -the rubber isolator mounts is using cutting edge polymer technology meet and exceed oem specifications -composite material with natural rubber by innovative synthesis make the rubber mounts more efficient and durable -Adapt to any Ductless Mini Spit System Condensers -Let air flow through the bottom, making it cooler -Eliminate vibration and sound transfer to the structures -Sturdy thick, natural rubber for maximum dampening effect -Works with any brand name Mounted Split Air Conditioner Heat Pump Systems Specifications:  - Base 4 1/4"x 1 3/4" - Tall 2 1/4"- The leg mount holds up to 800 pounds - Support A/C BTU ratings of:  7, 000 - 48, 000 BTU Converts the 5/16" sae charging-Vacuum ports to accept 1/4" SAE gauge-hose set.

Rubber Vibration Isolator Mounting Bracket for Mini Split Air Conditioner Condenser #ad - Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, debris, snow, floods and other perils. Refrigeration Technologies.

#ad



Rectorseal 65554 8-Ounce Bottle Better Bubble Leak Locator

#ad
Standard Plumbing Supply 65554 #ad - It detects leaks of refrigerant gases, oxygen, air, and most other gases. Its thick formula can be used at various temperature and pressure applications. Pick the bracket that fits the BTU output of your machine. Raises the condensing unit above floor for protection from dirt, debris, snow, floods and other perils.

Refrigeration Technologies. Damping capacity - reliable rubber vibration isolation cushion for shock absorption,. Set of 4 pieces. Adjustable for use with up to 9, 000 - 36, 000 btu units not exceeding a maximum weight capacity of 350 lbs. Best solution for the installation, all you have to do is to place the outdoor or indoor unit "legs" holes in the screws and fasten the nuts of the ANTI VIBRATION pads.

Rectorseal 65554 8-Ounce Bottle Better Bubble Leak Locator #ad - Main use: anti vibration Pad, Condenser pads, Vibration Isolator pads. Dimensions - 4 1/4"x 1 3/4" base, 2-1/4" Tall. Brass construction, with full swivel tip. 5/16" female, 1/4" Male SAE. Nylog-gasket/thread sealant. Ul listed. Whip is assembled with all UL components.

#ad