Top 10 Alignment Tools Automotive – Alignment Tools

As an Amazon Associate I earn from qualifying purchases.

1. BleepinJeep

#ad

BleepinJeep Alignment Tool, Mild Steel

#ad
BleepinJeep #ad - Easy to use, link to video instructions included. Laser Etched. Part number: bj-14706-Mild. Mild Steel. Made to fit almost any axle including: 5×4. 5, 8x170mm, 6×5. 5, 8×6. 5, 5×5, 5×5. 5, utv/atv- 4/156. Sold in Pairs. Fit type: Universal.
BrandBleepinJeep #ad
ManufacturerBleepinjeep #ad
Part NumberBJ-14706-Mild

2. 8MILELAKE

#ad

8MILELAKE Car Truck Front End Wheel Alignment Turn Plate

#ad
8MILELAKE #ad - Comes complete with black mat and dual pin locks for keeping the plates zeroed and in position while the vehicle drives up on them. This is a great tool for the mechanic or do-it-yourselfer. They are designed to help you perfect your own wheel alignment, and will let you know if your alignment is good or bad. These are pre- assembled and read to go. Quickly and easily measure the front end alignment on most cars and trucks.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height1.97 Inches
Length5.91 Inches
Width5.91 Inches
Part NumberWI0133
ModelWI0133

3. HECASA

#ad

High Grade Aluminum Toe Alignment Tool, Double Tape Measures Alignment Tools Automotive, HECASA DIY Toe Plates Wheel Alignment Tool, 4 Probes Toe Plates

#ad
HECASA #ad - Rust protection coating, lengthen the using life span. If you have a lifted/4x4 vehicle with larger than stock off-road tires, or a commercial vehicle, the tire sidewall may be too tall for this DIY alignment tool.

High quality made from high quality brushed aluminum sheet, with more functionality and durability. Fitment hecasa toe plates wheel alignment set was designed for car and SUV. Package content1 x toe plates wheel alignment set, 2 x high resolution tape measures with 1/32 in increments, 1x degree to inch conversion chart. Practical toolprovide help for adjusting toe after replacing suspension components tie rods, hitting a pothole, checking toe after going off track, adjusting alignment to you personal desired specifications, etc.

Etc. Designfeatures specially crafted slots, has been proved through tests that the ends of the tape measures won’t fall out when you using it.
BrandHECASA #ad
ManufacturerHECASA #ad
Part NumberNN64
ModelNN64

4. YXGOOD

#ad

YXGOOD Universal Magnetic Gauge Tool for Car Truck Adjustable Camber Castor Strut Wheel Alignment

#ad
YXGOOD #ad - Professional toolsallows adjustment to maintain correct wheel alignment and even tyre wear. Suitable for automobile cars motorcycles trucks vans SUV tire repair. Attach the magnetic gauge to the hub or disc brake, suitable for accurate checking of the castor and camber angle Wheel Alignment tool".

Accurate measurementmeasures the camber and caster angle on the wheel hub or brake disc. Easy to readsize: 4. 5’’*1. 2’’*08’’, it has a simple leveling adjustment from -5 degrees to 5 degrees. Body of gauge is made of high density aluminum and precision level vial, high strength plasticity. Adjustable gaugeallows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.

Multi-functionthe magnetic gauge tool has a powerful magnet it can easily attached on all kind metal surfaces. Also it could be used as a normal gradienter. Note:please double check and make sure the panel is balance before using. You could screw the button behind the gauge to adjust panel level.
BrandYXGOOD #ad
ManufacturerYXGOOD #ad
Height2.24 Inches
Length7.48 Inches
Width2.99 Inches
Part Number2

5. Speedway Motors

#ad

Front End Toe Alignment Gauge Tool

#ad
Speedway Motors #ad - High tech aluminum gauge for measuring toe. Maximum 67-1/2 inch track width. Eliminates need for tape measures. 67 1/2" max width. Measures in 1/16" increments.
BrandSpeedway Motors #ad
ManufacturerSpeedway Motors #ad
Height2.4 Inches
Length41.2 Inches
Weight6.15 Pounds
Width4.4 Inches
Part Number3008000

6. wonofa

#ad

Wonofa 15" Steering Wheel Holder Alignment Adjustable Car Steering Alignment Tool Fit for Cars Trucks

#ad
wonofa #ad - Dimension:15 inch height, 6. 1 inch width. The steering wheel holder made of plastic and iron. 15 inch steering wheel tool used for fixing steering wheel position, fits for most of auto. The steering wheel alignment tool can be adjusted the height by pressing the locking switch, more convenient to use. Steering wheel holder tool has a loaded spring to fit a wide variety of, trucks etc.
Brandwonofa #ad
Manufacturerwonofa #ad
Height1.97 Inches
Length5.91 Inches
Width3.94 Inches
Part Numberwf0503

7. Tenhulzen Automotive

#ad

Tenhulzen Automotive Toe Plates Wheel Alignment Tool, Most Accurate Toe Plates on The Market, Made in USA

#ad
Tenhulzen Automotive #ad - Everything snaps together for easy storage and transport, no case needed. Degree alignment specs can be used thanks to the attached degree to inch conversion chart. Specially cut slots will not let the ends of the tape measures fall out while in use. Package includes 2 high resolution tape measures with 1/32in increments. Measurements are taken from the wheel rim itself, NOT the tire like other toe plates.
BrandTenhulzen Automotive #ad
ManufacturerTenhulzen Automotive #ad
Height8 Inches
Length2 Inches
Width23.5 Inches
Part Number2200
Model13

8. Toolwiz

#ad

Toolwiz Universal Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tools for Car Truck RV Tire Repair Caster Alignment Castor Wheel Gauge Camber Alignment Tools Camber Gauge

#ad
Toolwiz #ad - Universal automotive tool for wheel alignment, Chevrolet, Jeep, caster camber gauge compatible with BMW, Toyota, Honda, Benz, Citroen. Make magnetic gauge tool for camber castor strut wheel alignment easier.

This wheel alignment balancing tools allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. With it's strong magnetic attraction, the camber alignment tool can easily attached on all kind metal surfaces. Measures the camber and caster angle on the wheel hub or brake disc.

You can ask seller for sending User Manual. Alignment tools automotive: easy to read through accurate scale with range of measurement from -5 up to +5 degrees. Also, this magnetic camber alignment gauge could be used as a normal gradienter. The alignment gauge is suitable for accurate checking of the castor and camber angle.
BrandToolwiz #ad
ManufacturerToolwiz #ad
Height1.97 Inches
Length4.92 Inches
Width0.79 Inches
Part NumberTAC0015
ModelTAC0015

9. Tenhulzen Automotive

#ad

Tenhulzen Automotive 2-Wheel Alignment Tool, Made in USA, All-in-one Camber/Caster/Toe Plates

#ad
Tenhulzen Automotive #ad - Camber accurate to Within 01 degrees much better than a bubble gauge. Detailed, step by Step Video Instructions. All-in-one tool measures camber, Caster, AND Toe! Patent pending wheel stand-offs provide unparalleled accuracy. Expensive turn plates Are NOT Needed for Caster Measurment.
BrandTenhulzen Automotive #ad
ManufacturerTenhulzen Automotive #ad
Height2.25 Inches
Length23.5 Inches
Weight5.88 Pounds
Width9.8 Inches
Part Number3300
Model3300

10. PMD Products

#ad

PMD Products Magnetic Camber Caster King Pin Gauge Automobile Car Truck Wheel Alignment Tool

#ad
PMD Products #ad - Mounts onto a hub or brake disc for quick and accurate measurement of camber & castor angles. On the rear there are two brass adjuster knobs, one to zero the bubble during angle measurement and the other for adjusting the king pin inclination. The ÿcamber gauge has fixed graduation from +5ø to -5ø. The king pin gauge is graduated from 0 to 14 left to right. The adjustable castor gauge is graduated from +11ø to -3ø. Also does king pin inclination.
BrandPMD Products #ad
ManufacturerPMD Products #ad
Part Number916