Top 10 PMAG 30 Ar/m4 Gen M2 – Ammunition & Magazine Pouches

As an Amazon Associate I earn from qualifying purchases.

1. MTM

#ad

MTM TMC15 Tactical Mag Can

#adMTM #ad - Designed to hold 20 or 30 round rifle magazines in precut foam padding. Capacity: 15. Dual latches for better sealing and prevents accidental openings; Made in USA. Stackable design and triple padlock tabbed for security. Water-resistant O-ring seal for dry storage; Non-submersible.

Brand	MTM #ad
Manufacturer	MTM Molded Products Company #ad
Height	5 Inches
Length	5 Inches
Weight	0.38 Pounds
Width	5 Inches
Part Number	TMC15
Model	TMC15
Warranty	(5) years manufacturer; living hinged products for (10) years

2. Vortex

#ad

4 MOA Red/Green Dot,Black, Vortex Optics Strikefire II Red Dot Sight

#adVortex #ad - It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions. Max windage adjustment- 100 MOA. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance.

The strikefire ii red/green dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. The strikefire II runs off a CR2 battery. Fully multi-coated lenses provide a clean and bright, unobscured point of view.

With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. Unlimited eye relief allows for rapid target acquisition. Max elevation Adjustment- 100 MOA. An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.

Brand	Vortex #ad
Manufacturer	Vortex Optics #ad
Height	3 Inches
Length	7.25 Inches
Weight	0.53 Pounds
Width	6.25 Inches
Part Number	SF-RG-501
Model	SF-RG-501
Warranty	Unlimited, unconditional lifetime warranty.

3. MGFLASHFORCE

#ad

Open-Top Tactical Kangaroo Magazine Pouches, MGFLASHFORCE Triple Molle Mag Pouch for Rifle and Pistol

#adMGFLASHFORCE #ad - The bungee can be easlily adjusted for different size magazines. Upgraded pistol mag pouchthe pistol mag pouches feature adjustable flaps as well as the side elastic bands to ensure that your single /double stack magazines stay securely stashed within.

In addition, it is reinforced and double sewn at all stress points so it can stand up to prenty of abuse. The ak mag pouch is compatible with MOLLE webbing, making it easy to attach in a variety of locations on your tactical vest or chest rig for rapid access. Suitable for most small caliber rifle magazines30-round and 40-round M4/M16 magazines, 30-round AK47/AK74 magazines, 30-round G36 magazines, etc. Secured in placethe open top of ar mag pouch can provide quick access to magazines for rapid reloading while holding your magazines securely when you are in the task.

It can avoid your pistol mags from falling out while running. High qualitythe triple mag pouch are made by 900d polyester so it has better tear- resistant and wear-resistant. Rifle magazine pouchfeaturing with side elastic band, the mag pouch 5. 56 can grab your rifle magazines tightly. Compatible with mollethe internal side of the m4 mag pouch has been revamped to laser cut MOLLE to enhance durability and shave weight.

Brand	MGFLASHFORCE #ad
Manufacturer	MGFLASHFORCE #ad
Weight	0.55 Pounds

4. Magpul

#ad

Flat Dark Earth, Magpul Rifle Bipod Gun Rest for Hunting and Shooting, M-LOK

#adMagpul #ad - Optimized for rapid one-handed adjustments; quickly and quietly transitions between countless user configurations. Easily loaded with stabilizing forward tension without fear of failure or warping; At just over 11 ounces, the Magpul bipod is lighter than many pricier bipods currently on the market.

An industry-exclusive 50 degrees of total tilt and 40 degrees of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Made of lightweight mil-spec hard anodized 6061 T-6 aluminum and Injection-molded polymer; Aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps.

Spring-tension legs stow neatly forward and snap down and lock into place with one hand; Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.

Brand	Magpul #ad
Manufacturer	Magpul Industries Corp. #ad
Height	3 Inches
Length	9 Inches
Weight	1 Pounds
Width	4 Inches
Part Number	MAG933-FDE
Model	MAGBP

5. Magpul

#ad

Black, Magpul Tactile Lock-Plate Mag Enhancement Pack of 5, Type 1

#adMagpul #ad - Immediate tactile identification of magazine load out . Two fully distinct Tactile design features provide three separate options for mixed loadouts . Retains pmag gen m3 strength and performance characteristics; fits standard PMAG Gen M3 floor-plates. Ridge heights are optimized for gloved hand usage  . 1/8" feature heights minimize snag hazards and optimize Tactile identification  .

Brand	Magpul #ad
Manufacturer	Magpul Industries Corp. #ad
Height	4.25 Inches
Length	7.5 Inches
Weight	0.2 Pounds
Width	1 Inches
Part Number	MAG803-BLK
Model	MAG803-BLK

6. ProCase

#ad

Open-Top Triple Tactical Stacker Mag Pouch -Black, ProCase 6 Pouch Magazine Holder for Rifle

#adProCase #ad - 6 slots rifle mag pouches can hold most small-caliber 5. 56 / 7. 62rifle magazines, 30/40-round m4/m16 magazines, such as M14, 30 rounds G36 magazine.4 molle snap loops on the back for easy attachment to your tactical vests, bags, rifle case, belts; Molle webbing on the front allows you to attach additional pouches if needed.

Mag holder front pocket size: 3. 14*1. 18*3. 74 inch, back pocket size: 5. 9*1. 96*8. 85 inch; made from waterproof 1000D nylon and combined with reinforced stitching for long lasting durability. 6 draining holes at the bottom help sand or moisture to drip out in case you get caught in foul weather, keeping your magazines away from potential damages caused accidentally.

Elastic bungee cords can be adjusted to hold any mag capacity in place securely without fear of losing a mag, considerate pull tabs on the open top for fast reloading and easy grip in a hasty situation.

Brand	ProCase #ad
Manufacturer	ProCase #ad
Height	0.65 Inches
Length	8.85 Inches
Weight	0.19 Pounds
Width	5.9 Inches
Part Number	PC-08361566
Model	VC-ZSB-UH1580-Black
Warranty	Manufacturer Warranty

7. Lancer Tactical

#ad

Lancer Tactical Gen 2 Hi-Cap 300 Round AEG Airsoft Training Metal Magazine BLACK/5X

#adLancer Tactical #ad - Feeds into aeg seamlessly. 300rd high capacity magazine built with a metal shell for durability. Designed with a high tension spring. Compatible with all lancer tactical m4 aegs and most standard m4 aeg rifles. Bottom nylon polymer winding wheel.

Brand	Lancer Tactical #ad
Manufacturer	Lancer Tactical #ad
Weight	2 Pounds
Part Number	SB-M001

8. GunSkins

#ad

Easy to Install and Fits 30rd Magazines, GunSkins AR-15 Mag Skin, Proveil Victory, 100% Waterproof Non-Reflective Matte Finish, Premium Vinyl Mag Wrap with Precut Pieces, Made in USA

#adGunSkins #ad - Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. Removeable and leaves behind no residue – this non-permanent finish will not alter the resell value of your gun. If you need to take it off, simply add heat and remove. This gunskins product will be free of fading for the duration of the warranty period as long as initial user has the product correctly installed on a firearm, firearm accessory or other GunSkins approved application.

Switch patterns for different hunting seasons with ease! Lifetime warranty – this gunskins product has a lifetime warranty which covers normal use by the initial user of this product. Also works on airsoft mags, too! Kit includes pieces for the left and right side of a single magazine. No cure time, ready for immediate use! Waterproof non-reflective matte finish – gunskins are made from high-performance, no rust, premium vinyl.

Easy to install vinyl wrap – do it yourself installation means you have creative control. Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. This is perfect for hunting waterfowl when you are knee deep among the reeds. The surface will be just as it was prior to installation. Install in just a few hours.

Brand	GunSkins #ad
Manufacturer	GunSkins #ad
Height	7 Inches
Length	8.75 Inches
Weight	2 ounces
Width	0.25 Inches
Part Number	ar-15-single-mag-skin-victory

9. Magpul

#ad

3-Pack of MagPul Ranger Floorplates

#adMagpul #ad - Incorporates an integral loop similar to the original Magpul USGI Ranger. Floorplate replacement for the 223 pmag 30 geN M2 MOE, PMAG 30G, and EMAG. Provides unsurpassed speed and control during high stress, tactical mag changes. Made in USA.

Brand	Magpul #ad
Manufacturer	Magpul Industries Corp. #ad
Height	8 Inches
Length	6 Inches
Weight	1 Pounds
Width	8 Inches
Part Number	MAG212-BLK
Model	MAG212-BLK

10. RUSFOL

#ad

Home Magazine Storage Rack, Solid ABS 6X Standard PMAG Wall Mount, Mag Holder, 1 Pack

#adRUSFOL #ad - Made of high-quality ABS Plastic, strong enough to hold your devices. Easy install, 4 x screws, just place the bracket on the right position, and screw it to the wall.1-year replacement service! . Designed for pmag, solid, low profile and precise, snug fit the magazines!. Rigid construction can handle fully loaded magazines steadily, preserve your mag from falling off! Sleek surface with frosting treatment, ensuring that your device will not be scratched. Package included: 1 X Mount, 4 X Wall Plugs.

Brand	RUSFOL #ad
Manufacturer	RUSFOL #ad
Part Number	RU008