Top 10 Raximus Fishing Rod Holder – Fishing Rod Racks

As an Amazon Associate I earn from qualifying purchases.

1. Raximus


Raximus, Modular, Adjustable, Vertical or Ceiling Mounted 5-Rod Holder. Get Organized with Raximus. Blue,White,Silver, & Expandable, Horizontal, Performance Fishing Rod Rack

Raximus #ad - Personalize your rack! Lifetime guarantee - the raximus “out of the corner” performance guarantee. If your raximus fishing rod storage product isn’t better than storing your rods in a corner, or any of those cheap plastic and foam rod racks, we’ll buy it back, no questions asked.

Versatile! all components built to last and are totally rust and corrosion-proof and designed to withstand the harshest saltwater environments. Mount vertically, truck racks, ceilings, boats, horizontally, doors, or overhead. Slide-to-side adjustability. Streamlined design allows multiple units to be placed next to each other or wrapping a wall corner. Don’t risk damaging your rod investments with an inferior rack. Easy mounting. Heavy-duty aluminum RaxTrack and stainless-steel hardware will never corrode.

Ideal for do-It-Yourselfers DIY. Perfect for your garage, camp, boat, mancave, boathouse, or basement. The keeper clips and loops are fully adjustable and lock into place on our RaxTrack Rails tool included allowing you to customize your rack for larger or smaller rod/reel combinations. Mount to your walls, and kayak trailers quickly and with ease. It is this revolutionary technology that keeps your rods locked and protected in place no matter how they are mounted.
BrandRaximus #ad
Part Number860001068856
Warrantylife time

2. Berkley


Berkley Twist Lock Utility 4 Fishing Rod Rack

Berkley #ad - Utility twist lock design allows for various mounting options on walls, ceilings, utility vehicles and in boats. 13 1/4" on center interlocking anchor points allows for rack expansion. Improved foam and twist lock rod holding mechanisms. Molded from durable, lightweight polypropylene. Utility twist lock feature provides extra stability while securely storing up to 4 rods or combos.
BrandBerkley #ad
ManufacturerPure Fishing #ad
Height1.75 Inches
Length14.55 Inches
Weight0.77 Pounds
Width5.2 Inches
Part NumberBRMTL
WarrantyManufacturer Warranty

3. Raynesys


Fishing Rod Carrier Fishing Pole Storage Straps for Truck Car SUV Wagons Van, 5 Rod Capacity, Raynesys Vehicle Fishing Rod Holder, Car Fishing Pole Roof Rack Inside, Heavy Duty Adjustable 30-54 Inch

Raynesys #ad - Please make sure to pull the straps as tight as you can for better bearing the weight of the fishing rod. Save space it is a good way to manage your car space. Heavy duty thanks to high strength nylon material belts with snap buckles, they don't slide back and forth while driving.

Adjustable rods belt fishing rod rack total length 85. 8 inches, adjust from 30" to 53"76cm- 135cm, suitable for most trucks and cars with four handlebars, which can hold up to 5 fishing rods. There is no need to drill on cars you loved. With the help of it, the inner space of cars will be kept tidy and in order. No more mess! wide applicability raynesys fishing pole rack holder applies to trucks, vans, RV, wagons, SUVs, garage, pickups, wall. Etc. Easy installation the buckle equipped can help easy installation and storage. Note:please measure the space in the car before buying.
BrandRaynesys #ad
ManufacturerRaynesys #ad
Height1.97 Inches
Length94.49 Inches
Width1.5 Inches
Part NumberP723314082417

4. Calamus


Great Fishing Pole Holder for Garage,Vertical 6-Rod Rack, Store 6 Rods or Fishing Rod Combos in 13.6 Inches, Calamus Vertical Fishing Rod Holder – Wall Mounted Fishing Rod Rack, 1 Pair

Calamus #ad - One size fits more. It is ideal for keeping your rods and reels in place. Store up to 6 rods or combos- the calamus fishing pole holder is able to store six individual rods neatly and securely in less than 14 inches of horizontal wall space. Eva foam grip and durable abs base- the calamus fishing pole rack is equipped with durable eva foam grip pads designed to hold the poles safely and protect your rods from scratches.

Two options- we have two types of fishing pole holder: vertical style and Horizontal Style. Applicable rod diameter: 028''-04''. If you have many fishing rods, two pairs are a better choice. Interlocking system- special interlocking design allows easy extension for more than two rod racks. Simple installation: it’s light weight and easy to install with the included 6 screws and 6 drywall anchors. The vertical fishing rod holder has a durable ABS base, which prevents rods from sliding down.

Both can be mounted on the wall of garage or workshop, keeps your expensive rods off the ground to prevent damage. The horizontal style can be installed horizontally on the wall to prevent injury to children. You can also adjust distance between two rod racks depends on your needs. To install the rod rack, install and tighten all screws with a screwdriver, drill and install the anchors, determine the location of the rod rack, level the rod rack and mark the mounting holes, determine the distance between two pieces of the rod rack and repeat the above steps.
BrandCalamus #ad
ManufacturerCalamus #ad
Weight0.86 Pounds

5. KastKing


KastKing Patented V15 Vertical Fishing Rod Holder, Store 15 Rods or Rod Combos in 18 Inches, Wall Mounted Rod Rack

KastKing #ad - For additional stability, hang the rod with the thread wrapped line guides just above the v-groove. Affordable Innovation. Rods and combos can be mounted virtually anywhere along the length of the rod, permitting reels to be staggered at different heights for minimum storage space. Simple installation – kastking v15 fishing racks have 3 mounting holes.

The kastking v15 fishing rod rack will organize your fishing gear and save space. Key features - store up to 15 fishing rods or fishing rod and reel combos in less than 18” of wall space – Innovative Patented Design U. S. To remove your combo from the fishing rod rack simply grab the rod near the rod rack and pull straight out. The v-grooves are co-injected with a tacky thermoplastic polymer material to ensure rods and combos are held securely in your rack and doesn’t damage or mar your rods. Store 15 rods or combos – the kastking v15 vertical fishing rod rack can store up to 15 rods or combos in less than 18 inches of horizontal wall space.

Durable material – the kastking v15 fishing rod holder is molded with tough amorphous polymer material which is resistant to heat, chemicals, and impact. The tapered v-grooves can accommodate up to a ½” diameter rod with a reel attached. Simply push the rod firmly into either the large or small v-grooves until the polymer grip material grabs the rod. To install the rack, re-level rod rack, install anchor for center mounting hole, determine the correct mounting height for your poles, install one of the outer screws into a stud, level the rack and mark mounting holes, install and tighten all screws.
BrandKastKing #ad
ManufacturerKastKing #ad
Part NumberKTAROMRR-V15BK1



Fishing Rod Racks Wall or Ceiling Fishing Rod/Pole Rack Holder Storage Hook Holds up to 12 Fishing Rods Wall Mounted for Garage Cabin and Basement

WIPHANY #ad - Sturdy & durable, prevent corrosion and scratch. With a pvc rubber on the rack, which provide maximum protection, the fishing rod storage rack is made of heavy-duty steel, which makes it more durable and sturdy. Essential for any sportsman, great for any location in the home or cabin, as a display or rack for Indoor, Utilize extra space in garage/cabin/ boat rooms to create convenient storage, suitable for storing fishing rod/poles on home or garage.

With a fishing rod rack, minimizing the risk of damage and clutter that fishing rods are easily known to experience. It can be used for a long time. Finished by black powder-coated, prevent your fishing rods from damage or scratches. Note: fishing Rods are Not included. Classic styling and durability. The durable 4-piece construction offers lasting functionality and features deep groove cuts to hold up to 12 rods.

Holds up to 12 rod and reel combos. This is a great space-saving device and will only add longevity to the life of your fishing poles. Maximize your space and eliminate garage room clutter. Easy to install, the mounting hardware is included, and easy to assemble rod storage rack can be easily mounted on the wall to organize your rods in a horizontal position or the ceiling. Deep groove cuts for easy access, keep your rod and reel combos neat and untangled by our wall and ceiling 12-rod rack.
BrandWIPHANY #ad
ManufacturerAhomiwow #ad
Height2 Inches
Length12 Inches
Width0 Inches

7. Livoccur


Fishing Pole Holder Wall or Ceiling Mount Rack, Livoccur Fishing Rod Rack, Holds 9 Rods for Home, Store, Basement, Cabin, Fishing Rod Storage Rack, Garage

Livoccur #ad - Easy to cleanthis fishing rod rack has a smooth surface and can be cleaned with a damp cloth, which is simple and convenient. Unique designdesign with deep grooved rod rest, allows for the rods to be fixed in place.

This fishing rod rack uses an asymmetrical design. It holds up to 9 fishing rods and reel combos. Versatile installationit can be installed on the wall or on the ceiling to place your fishing rods horizontally. Space saving this fishing rod rack can create additional storage space to display and store the fishing rods, which keeps the room, garage and cabin organized and clutter-free. Rods not included. Corrosion resistancethe surface of the fishing rod rack is treated with black coating finish ​for protection, which can prevent the corrosion and scratch of the fishing rod. Installation on both sides is more stable.
BrandLivoccur #ad
ManufacturerLivoccur #ad
Height1.57 Inches
Length17.24 Inches
Weight2 Pounds
Width2.95 Inches



RAILBLAZA Tackle Caddy Trackmount Track Mount

RAILBLAZA #ad - Slots for pliers, vhf’s, lures, drink bottles, keys, phones, binoculars, sunblock, mugs & much more. Supplied as a kit, easy to assemble. Includes Track Hardware. Uv resistant material. Holds 2 x plano 3400 series Original Stowaway tackle boxes or similar.
ManufacturerRAILBLAZA #ad
Part Number09-4151-11



RAILBLAZA Rod Holder R with MiniPort Track Mount Kayak Rod Holder Track Mount

RAILBLAZA #ad - Railblaza rod holder r for spinning reels, bait casting reels or fly reels. Lightweight but strong with fiberglass reinforced plastic. The miniport has a compact design & completely tool-less operation. The possible rotation of 360 degrees. Compatible with all a kayak tracks.
ManufacturerRAILBLAZA #ad
Part Number08-0086-11

10. Sratte


Horizontal Fishing Rod Holder Wall Mount Fishing Rod Holder for Garage 13.6 Inch Vertical Fishing Pole Holder 6 Fishing Rod Rack for Fishing Boat Garage Wall AccessoriesHorizontal Style,4 Pieces

Sratte #ad - Sufficient quantity: there are 1 pair of boat mount fishing rod holders, proper for you to store rods about 028-04 inches and nice to satisfy your needs of storage and display in daily life. Safe and reliable: the fish rod holders for boat are made of ABS plastic material, and the grip pad is made of elastic EVA foam material, deform or break, not easy to bend, sustained and sturdy in texture, can be kept and applied for a long time.

Nice workmanship: the fishing rod racks are easy and convenient for you to install and disassemble; You only need to use the 6 installation screws and drywall inserts, and then install them on the flat wall surface by using the matching mounting hardware.

Where to apply: the fishing rod holders are suitable for many decoration styles and places, such as game rooms, restaurants, billiard rooms, bars, clubs, garages and so on.34. 5 x 6. 4 x 3. 4 cm/ 13. 6 x 2. 5 x 1. 3 inches, appropriate size for you to store about 6 pieces of rods, making your home or garage well organized and clean. Proper dimension to use: the boat rod holders measure approx.
BrandSratte #ad
ManufacturerSratte #ad
Height13.58 Inches
Length2.52 Inches
Width1.34 Inches