As an Amazon Associate I earn from qualifying purchases.
It has the characteristics of light weight, fashionable and durable. Bow saddle applicable: clip-on seat part is made of high-strength aluminum alloy, safe and durable; upper and lower clip-on structure, one-piece molding, supporting most bow saddles on the market.
The bike seatpost is made of T800 full carbon fiber, more stable and safe riding. Comfortable riding: ergonomic design to give your ride a comfortable experience,suitable for most road bikes, fixed gear bikes, mountain bikes, track bikes, BMX,downhill bikes and so on. Surface 3k matte design, light and strong, carbon fiber has a density less than 1/4 of that of steel, good shock absorption, but its strength is 5-7 times that of steel.

Wide application: suitable for most mountain bikes, DH, road bikes, track bikes, downhill bikes, MTB, BMX, fixed gear bicycle, etc. How to choose yours: you need to either check your INTERNAL diameter or check the specs on your original bicycle seatpost or bike.

How to choose the size:1. Check the diameter of the original seatpost, choose the same size as the original diameter. 2. Measure the inside diameter of the frame tube.


Please refer to the picture for the method of choosing the size. Saddle angle adjustable: the saddle can be adjusted by adjusting the screws on the front and rear side of the clamp seat to adjust the angle of the saddle in small increments.
It can adapt to different road needs and adjust to a comfortable sitting position. Break wind design: the upper part of the tube is made of flat structure to reduce the wind resistance and break wind design, which can improve your riding speed. Surface 3k matte pattern design, the clamp is made of high-strength aluminum alloy, better shock absorption, ultra-lightweight, stylish and durable.

Fast-deer will continue to strive for excellence and continue to be unique. 2. Carbon fiber base, carbon fiber cover——the clamping design passes through a carbon fiber base and carbon fiber cover to protect the saddle rail and reduce weight.
Torque spec:seat post collar determined by your Frame manufacture/Seat post Collar(Recommended locking torque ≤ 5. 1nm. We cannot guarantee that the weight of each seat post is 160 Take 27. 2x350mm size as an example), but we promise that the weight difference will never exceed 5g. 1. Seat post structure——fast- deer seat post made from 100% unidirectional carbon fiber japan toray T800

Light weight, never rust. How to choose the size:1. Check the diameter of the original seatpost, choose the same size as the original diameter. 2. Measure the inside diameter of the frame tube.

Cracks can occur when strong tensions occur. Since it is made of carbon, we recommend tightening the body to support it by tightening with your hands. 2. Choose the size according to the inside diameter of the frame tube.


You can probably get a pretty steep angle by loosing the rear bolt and tightening the front bolt. Ultralight carbon fiber: made of full 3k T800 carbon fiber -- as known as "black gold" in the industry, Light weight, never rust.
1. ROADNADO
#ad
MTB Carbon Fiber Bicycle Seatpost Adjustable Bicycle Seat Tube for MTB Road Bike, ROADNADO Carbon Bike Seatpost 27.2 / 30.8 / 31.6*350mm
#adROADNADO #ad - Choose the right size:when purchasing, please be sure to pay attention to confirm the outer diameter size of the seat tube used in your frame to avoid buying back a seat tube that can not be used. Please refer to the picture description for the method of selecting the size.It has the characteristics of light weight, fashionable and durable. Bow saddle applicable: clip-on seat part is made of high-strength aluminum alloy, safe and durable; upper and lower clip-on structure, one-piece molding, supporting most bow saddles on the market.
More information #ad
Adjustable saddle angle:saddle can be flexibly changed by adjusting the screws on the front and rear side of the clip seat, according to your own requirements, adjust to a comfortable sitting position. Carbon fiber material:as a new material with excellent performance, good impact absorption and good rigidity. The bike seatpost is made of T800 full carbon fiber, more stable and safe riding. Comfortable riding: ergonomic design to give your ride a comfortable experience,suitable for most road bikes, fixed gear bikes, mountain bikes, track bikes, BMX,downhill bikes and so on. Surface 3k matte design, light and strong, carbon fiber has a density less than 1/4 of that of steel, good shock absorption, but its strength is 5-7 times that of steel.
Brand | ROADNADO #ad |
Manufacturer | ROADNADO #ad |
Part Number | BNT0925-2 |
Model | Gerade |
More information #ad
2. TPard
#ad
TPard Carbon Bike Seat Post 27.2/31.6 Ultralight Carbon Fiber Bicycle Seatpost Bike Seat Tube for Mountain Road Bikes MTB BMX
#adTPard #ad - You can probably get a pretty steep angle by loosing the rear bolt and tightening the front bolt of our bicycle seat pole. Ultralight carbon seat post: made of full 3K T800 carbon fiber -- as known as "black gold" in the industry, Light weight, never rust.Wide application: suitable for most mountain bikes, DH, road bikes, track bikes, downhill bikes, MTB, BMX, fixed gear bicycle, etc. How to choose yours: you need to either check your INTERNAL diameter or check the specs on your original bicycle seatpost or bike.
More information #ad
Size: Φ27. 2 × 350mm apx. Adjustable seatpost angle: the seat tube angle is controlled by how the bolts are tensioned. Strength: maxium of 580lbs ; Setback: 0mm. 220g/pc, total length: 350mm, tube length: 325mm, head Length: 25mm. Adjust tube length of 0 to 320mm. The recommended maximum torgue force would be 7 Nm, or else the cracks may occur.Brand | TPard #ad |
Manufacturer | TPard #ad |
Part Number | TPardzg-01 |
More information #ad
3. EC90
#ad
31.6, EC90 Carbon SeatPost 27.2 30.8 350mm 400mm 3K Carbon Fiber Bike Seatpost Suitable for Most Bicycle Mountain Bike Road Bike MTB MTN BMX 400
#adEC90 #ad - Total length: 350mm/400mm 15. 7inch, head length: 25mm 09inch strength: 4. 9 levels ultra high strength, Tube Length: 375mm 14. 8inch, maxium of 580lbs Setback: 0mm.How to choose the size:1. Check the diameter of the original seatpost, choose the same size as the original diameter. 2. Measure the inside diameter of the frame tube.
More information #ad
Frosting finish, nice touch feeling. Light weight, never rust. Suitable for most road bike, downhill bike, MTB, dh, BMX, mountain bikes, fixed gear bicycle, track bike, etc. With adjustable head, exquisite workmanship, Easy to install. 3k carbon fiber: constructed of ultra light and strong 3K Carbon Fiber.Brand | EC90 #ad |
Manufacturer | Kames Technology Co., Ltd #ad |
Length | 400 Millimeters |
Part Number | 56742121 |
More information #ad
4. Co-riding
#ad
Full Carbon Fiber Seatpost Light Mountain Road Bike MTB 27.2mm/31.6mm x350mm seatpost Gloss, 27.2mm
#adCo-riding #ad - Cycling bicycle MTB bike full Carbon fiber seatpost. The approx weight with 27. 2/350mm length is about 171g. Material : made of qualified carbon fiber. Power strength with light weight.More information #ad
Brand | Co-riding #ad |
Manufacturer | Co-riding #ad |
Part Number | 5E01-008 |
More information #ad
5. ROADNADO
#ad
ROADNADO Carbon Road Bike Seatpost Full Carbon Fiber Bicycle Seatpost Setback 27.2/31.6*350/400 mm Adjustable Clamp 3K Matte for Road Bike Offset 20mm
#adROADNADO #ad - Ultra-light carbon fiber material:seatpost tube body is made of carbon fiber material, high strength, more comfortable riding. 20mm offset design:in order to make your speed faster, road bikes, the seat tube position is 20mm backward than normal.Please refer to the picture for the method of choosing the size. Saddle angle adjustable: the saddle can be adjusted by adjusting the screws on the front and rear side of the clamp seat to adjust the angle of the saddle in small increments.
More information #ad
Size: diameter: 27. 2mm/31. 6mm length: 350mm/400mm please confirm the size of the seatpost you can use before you buy. Suitable for all kinds of bikes, mountain bikes, off-road bikes, fixed gear bikes, track bikes, downhill bikes, etc. It can adapt to different road needs and adjust to a comfortable sitting position. Break wind design: the upper part of the tube is made of flat structure to reduce the wind resistance and break wind design, which can improve your riding speed. Surface 3k matte pattern design, the clamp is made of high-strength aluminum alloy, better shock absorption, ultra-lightweight, stylish and durable.
Brand | ROADNADO #ad |
Manufacturer | ROADNADO #ad |
Part Number | FZG09-07RN |
More information #ad
6. FAST- DEER
#ad
Offset 20mm,Diameter 31.6/30.9/27.2mm,Weight 165g 350, FAST- DEER Carbon Fiber Seat Post Mountain/Road Bike Seat Tube 3K Matte, 30.9
#adFAST- DEER #ad - We will refund in full, never stop. Fast- deer, any product quality problems occur. Diameter: Ø27. 2/309/31. 6mm. 6. Fast-deer service——within two months of your purchase of fast-deer products, and we will not take back damaged products.Fast-deer will continue to strive for excellence and continue to be unique. 2. Carbon fiber base, carbon fiber cover——the clamping design passes through a carbon fiber base and carbon fiber cover to protect the saddle rail and reduce weight.
More information #ad
3. Weight——the weight of 27. 2x350mm is 160 +/- 5g. Ultralight, bladder materials or excess weight in the seat post, non-deformation, high strength, and corrosion resistance are all its characteristics. Torque spec:seat post collar determined by your Frame manufacture/Seat post Collar(Recommended locking torque ≤ 5. 1nm. We cannot guarantee that the weight of each seat post is 160 Take 27. 2x350mm size as an example), but we promise that the weight difference will never exceed 5g. 1. Seat post structure——fast- deer seat post made from 100% unidirectional carbon fiber japan toray T800
Brand | FAST- DEER #ad |
Manufacturer | Suzhou Luheming Technology Co., Ltd. #ad |
Length | 350 Millimeters |
Part Number | HT-HP-3K |
Warranty | NO |
More information #ad
7. Litetop
#ad
Litetop Carbon SeatPost 27.2 400mm 3K Carbon Fiber Bike Seatpost Suitable for Most Bicycle Mountain Bike Road Bike MTB MTN BMX Black
#adLitetop #ad - With adjustable head, Easy to install. Frosting finish, exquisite workmanship, nice touch feeling. Size: 27. 2 × 400mm apx 235g/pc, total length: 400mm, head length: 25mm.Light weight, never rust. How to choose the size:1. Check the diameter of the original seatpost, choose the same size as the original diameter. 2. Measure the inside diameter of the frame tube.
More information #ad
Adjust tube length of 0 to 370mm. Suitable for most road bike, mtb, BMX, track bike, fixed gear bicycle, mountain bikes, downhill bike, DH, etc.3k carbon fiber: constructed of ultra light and strong 3K Carbon Fiber. Strength: 4. 9 levels ultra high strength, Tube Length: 375mm, maxium of 580lbs ; Setback: 0mm.Brand | Litetop #ad |
Manufacturer | Litetop #ad |
Part Number | Litetop |
More information #ad
8. RXL SL
#ad
RXL SL Bike Seatpost Carbon Fiber Seat Post Offset Bike Seat Post 25mm Mountain Bike Seatpost Bicycle seatpost Cycling seatpost Full Carbon Black UD Matte 31.6x400mm
#adRXL SL #ad - 3, install the product correctly, please follow the specified tightening torque 4Nm. If there is no hole in the saddle, we recommend using a hexagon wrench to tighten the screw.Cracks can occur when strong tensions occur. Since it is made of carbon, we recommend tightening the body to support it by tightening with your hands. 2. Choose the size according to the inside diameter of the frame tube.
More information #ad
5, tighten the screws. 2, diameter:27. 2/308/31. 6mm;length:350/400mm;offset:25mm about choose the Size:1. Choose same size diameter With the original seatpost. 1, material:carbon fiber;appearance:UD Matte;Weight:Approx 210+/-10g. 4, this product is suitable for attachment to a saddle with a hole.Brand | RXL SL #ad |
Manufacturer | RXL SL #ad |
Part Number | RXLSLSP0042 |
More information #ad
9. JIMAITEAM
#ad
Seatpost Saddle Post, JIMAITEAM Full Carbon Fiber Seat Post Light Mountain Road Bike MTB
#adJIMAITEAM #ad - Shockproof & firmness. Length: 350mm / 400MM. Suitable for descent and off-road. Setback: 25MM. Precise angle : change the pedaling posture and riding angle to reduce the damage to the knee. Professional Design: The sturdy structure is not only beautiful.More information #ad
It can maintain a comfortable ride for a long time. Wide aange of applications: it is suitable for general seatposts for most racing and mountain bikes. Material & size: imported t800 high strength carbon fiber + aluminum alloy double nail chuck. Diameter: 27. 2mm/308mm/31. 6mm. After careful design.Brand | JIMAITEAM #ad |
Manufacturer | HAOQ #ad |
Part Number | BSP04 |
More information #ad
10. TPard
#ad
TPard Carbon Bike Seatpost 27.2/31.6 Ultralight Carbon Fiber Bicycle Seat Post Bike Seat Tube for Mountain Road Bikes MTB BMX
#adTPard #ad - The recommended maximum torgue force would be 7 Nm, or else the cracks may occur. 240g/pc, tube length: 325mm, total length: 350mm, head Length: 25mm. Strength: maxium of 580lbs ; Setback: 0mm.You can probably get a pretty steep angle by loosing the rear bolt and tightening the front bolt. Ultralight carbon fiber: made of full 3k T800 carbon fiber -- as known as "black gold" in the industry, Light weight, never rust.
More information #ad
Adjustable seat angle: the seat angle is controlled by how the bolts are tensioned. Wide application: suitable for most mountain bikes, track bikes, MTB, downhill bikes, fixed gear bicycle, DH, BMX, road bikes, etc. How to choose yours: you need to either check your INTERNAL diameter or check the specs on your original seat tube or bike. Size: Φ31. 6 × 350mm apx. Adjust tube length of 0 to 320mm.Brand | TPard #ad |
Manufacturer | TPard #ad |
Part Number | TPardzg-06 |
Warranty | 1 Year |
More information #ad